• Physicom Corp.
  • Measurement & Control Solutions

Leak Testing Systems

Products

ForTest is an innovator in the field of Dry Air Leak Testing. They offer feature rich Leak Testers based on Absolute Pressure Decay, Differential Pressure Decay and Dual Pressure Decay methods. Their modern Leak Test Systems, offer Touch Screen Displays for ease of configuration, Digital I/O and Fieldbus communication, such as Modbus and Ethernet IP.

T8720

T8720
  • Solid state sensor
  • Direct display of the volumetric leak
  • Continuous injection of test air
  • High capacity pneumatic valves
  • Heat-proof pneumatic valves
  • Low maintenance
  • Measurement up to 1,000 cc/min
OperationMass Flow
Resolution1 Pa (0.00015 psi)
Data StorageUSB
InterfaceRS-485, RS-232
Accuracy0.5%
T8990

T8990
  • Electronically Controlled Pressure Regulation
  • Multiple Programs for different parts, with the possibility of different pressures
  • Faster parameter programming
  • Multiple Languages, English, French, Spanish, Italian, …
  • Barcode Reader inputs and Printer output
  • Sequence – Pre-Fill Pressure, Reduced to Test Pressure, Stabilize, Measure Absolute Pressure Decay
  • Data Collection by Serial Number, using a PC or PLC ( optional Field buses, Ethernet IP, ProfiNet, EtherCAT Modbus )
OperationPressure Decay
# of Channels1
Resolution0.1 Pa (0.000015 psi)
Display6.2 in Colour Display
Data StorageUSB
InterfaceEthernet TCP/IP, EtherCAT, RS-485, RS-232, EthernetIP, Profinet
T8997

T8997
  • Two different testing methods
  • USB Type-B female connector for PC
  • 6 languages (English, Italian, French, German, Spanish, Portuguese)
  • Mechanical Start/Stop button
  • Firmware update via USB stick
  • Password protection
  • 24V I/O (Start,Stop,Test,Good,Reject,4BCD)
  • available measurement units: mbar, bar, psi, mmHg, mmH20, Pa, HPa, cc/min, cc/h, pressure/s , l/h , l/min
  • Staubli© front connector for calibrated leakage
OperationPressure Decay, Mass Flow
# of Channels1
Resolution1 Pa (0.00015 psi)
Display6.2 in Colour Display
Data StorageUSB
InterfaceEthernet TCP/IP, EtherCAT, RS-485, RS-232, Profinet
T0730

T0730
  • Weight 28g
  • Accuracy ±5% + 2 cc/min
  • Max working pressure 10 bar (over 10 bar under request)
  • Flow values starting from 200 cc/min
  • Made of stainless steel
  • SIT certificated calibration
  • Stäubli© male connector
  • Usable for pressure and vacuum applications
  • Pressure full scale: from -1 to 10 bar (customized for the client)
  • Flow full scale: (cc/min) : 200
  • Different pneumatics available for tubes (mm): Staubli Male, 1/8 Gas Male, 1/4 Gas Male
  • Test Gas: Hydrogen, Compressed air, Nitrogen
Accuracy0.5%
T8999

T8999
  • Aluminium Probe, with a 30° arm
  • Warning led and buzzer
  • Non-explosive, 5% hydrogen mix
  • USB slave, RS232, RS485, Can bus and TTY
OperationMass Flow
# of Channels1
Resolution1 Pa (0.00015 psi)
Data StorageUSB
InterfaceRS-485, RS-232
Accuracy0.5%
T0710

T0710
  • Weight 28g
  • Accuracy ±5% + 0,03 cc/min
  • Max working pressure 10 bar
  • Leak scales from 10 cc/h to 200 cc/min
  • Made of stainless steel
  • SIT certificated calibration
  • Staubli male connector
  • Usable for pressure and vacuum applications
  • Pressure full scale: from -1 to 10 bar (customized for the client)
  • Flow full scale: (cc/min) : 200
  • Power supply: No Supply
  • Different pneumatics available for tubes (mm): Staubli Male, 1/8 Gas Male, 1/4 Gas Male
  • Test Gas: Hydrogen, Compressed air, Nitrogen
Accuracy0.5%
T4890

T4890
  • Black anodized aluminium case
  • 3mm. plexiglass front panel
  • Dimensions: L 90 mm, H 150 mm, P 70 mm
  • Weight 450gr
  • Measure resolution of pressure decay of 0.1 Pa (for equipment until 1 bar)
  • ForTest, Modbus or Canbus protocol
  • USB port for PC connection
  • Serial port for connection with printer or bar code reader
  • Oled high contrast display 2.5” 128x64 pixel
  • Frontal leds indicating Test running, Good, Reject
  • Inputs of Start, Abort, recall up to 7 programs
  • Outputs for Test running, Good, Reject, Discharge
  • Possibility to store 50 programs for each channel
  • Fastening to Din bar, panel or directly on the station
  • External Pressure and flow regulators (on demand)
  • Pressure full scale: (mbar) : -1000, 200, 500, 1000, 2000, 6000
  • Power supply: 24 Vdc
  • Different pneumatics available for tubes (mm): 4x2.7, 6x4, 8x6
  • Test Gas: Hydrogen, Compressed air, Nitrogen
# of Channels2
Resolution0.1 Pa (0.000015 psi)
DisplayNumeric
Data StorageUSB
T2730

T2730
  • Shatter proof plexiglass front
  • Mass flow meter sensor
  • USB port for PC connection
  • Micrometer nozzle
  • Can detect flow rates up to 20 lt/min
Resolution1 cc/min
DisplayNumeric
Data StorageUSB
Accuracy0.1%
Leak Expert

Leak Expert
  • Versatile
  • Automatic set up
  • Remote assistance
  • Remote Installation
  • Calibration date reminders
Leak Test Manager

Leak Test Manager
  • Real-time display of data detected by the control unit
  • Graph of pressure and decay in real time
  • Set test parameters directly via software
  • Automatically download test results to Excel, Access or CSV files
  • Interface to barcode reader for article code tracking with test results
  • Possibility to start/stop/change testing programs
  • History of the results with measured values
InterfaceRS-232
Show More